Skip to content
Jonathan B Puthoff

Jonathan B Puthoff

Associate Professor

Chemical & Materials Engineering Department, College of Engineering

Email

jbputhoff@cpp.edu

Phone number

909 979 5678

Office location

17-2106

Office hours

M T W | 12-1:30 (M), 11-12 (T), 11-1 (W)

Publications

  1. J.B. Puthoff. "Bioinspired Attachment Systems for Adhesive Tapes in Green Tribology Applications." in Green Chemistry for Surface Coatings and Adhesives: Sustainable Technologies and Applications, 1st ed. (Royal Society of Chemistry, London, UK), 2018.
  2. J.B. Puthoff. "Dynamic friction in geckolike adhesives." MRS Adv., 2016. DOI: 10.1557/adv.2016.535.
  3. T.J. Hagey, J.B. Puthoff, K.E. Crandell, K. Autumn, and L.J. Harmon. "Modeling Observed Animal Performance Using the Weibull Distribution." J. Exp. Biol., 219: 1603-1607, 2016. DOI: 10.1242/jeb.129940.
  4. K. Autumn and J.B. Puthoff. "Properties, Principles, and Parameters of the Gecko Adhesive System" in Biological Adhesives, 2nd ed. (Springer-Verlag, Berlin, Germany), 2015.
  5. J. Puthoff. "The dynamic adhesion problem and its application to structured adhesives" In Proceedings of the 2014 Meeting of the Adhesion Society (The Adhesion Society, Blacksburg, VA, USA), 2014.
  6. K. Autumn, P. Niewiarowski, and J.B. Puthoff. "The Evolution of Adhesive Systems: The Gecko as a Model System." Annu. Rev. Ecol. Evol. Syst., 45: 445-470, 2014. DOI: 10.1146/annurev-ecolsys-120213-091839.
  7. T.J. Hagey, J.B. Puthoff, M. Holbrook, L.J. Harmon, and K. Autumn. "Variation in seal micromechanics and performance of two gecko species." Zoomorphol. 133(2): 111-126, 2014. DOI: 10.1007/s00435-013-0207-2.
  8. J.B. Puthoff, A.K. Bentley, K. Autumn, and J. DePaula. "Materials, Design, and Innovation in Nonmajors Science Education." In Mater. Res. Soc. Symp. Proc. Vol. 1583 (Materials Research Society, Pittsburgh, PA, USA), 2013. DOI: 10.1557/opl.2013.778.
  9. A.W. Gillies, J. Puthoff, M.J. Cohen, K. Autumn, and R.S. Fearing. "Dry Self-Cleaning Properties of Hard and Soft Fibrillar Adhesives." ACS Appl. Mater. Interf. 5(13): 6081-6088, 2013. DOI: 10.1021/am400839n.
  10. J.B. Puthoff, M. Holbrook, M. Wilkinson, K. Jin, N.S. Pesika, and K. Autumn. "Dynamic friction in natural and synthetic gecko seal arrays." Soft Matter 9(19): 4855-4863, 2013. DOI: 10.1039/C3SM50267H.
  11. P. Loskill, J. Puthoff, M. Wilkinson, K. Mecke, K. Jacobs, and K. Autumn. "Macroscale adhesion of gecko setae reflects nanoscale differences in subsurface composition". J. R. Soc. Interface 10(78): 20120587, 2013. DOI: 10.1098/rsif.2012.0587.
  12. J.B. Puthoff, M. Prowse, M. Wilkinson, and K. Autumn. "Moving beyond the Steady State: Dynamic Properties of Gecko Setae." In Proceedings of the 2012 Meeting of the Adhesion Society (The Adhesion Society, Blacksburg, VA, USA), 2012.
  13. K. Jin, Y. Tian, J.S. Erickson, J. Puthoff, K. Autumn, and N.S. Pesika. "Design and Fabrication of Gecko-Inspired Adhesives." Langmuir 28(13): 5737-5742, 2012. DOI: 10.1021/la204040p.
  14. J.B. Puthoff, M. Holbrook, M.J. Wilkinson, and K. Autumn. "Probing Friction Forces Using Gecko Materials." In Mater. Res. Soc. Symp. Proc. Vol. 1464E (Materials Research Society, Pittsburgh, PA, USA), 2012. DOI: 10.1557/opl.2012.1047.
  15. M. Prowse, J.B. Puthoff, M. Wilkinson, and K. Autumn. "Effects of humidity on the mechanical properties of gecko setae." Acta Biomater. 7(2): 733-738, 2011. DOI: 10.1016/j.actbio.2010.09.036.
  16. J.B. Puthoff, M. Prowse, M.J. Wilkinson, and K. Autumn. "Energy Storage, Release, and Dissipation in the Gecko Adhesion System." In Mater. Res. Soc. Symp. Proc. Vol. 1301 (Materials Research Society, Pittsburgh, PA, USA), 2011. 10.1557/opl.2011.574.
  17. J.B. Puthoff, M.S. Prowse, M. Wilkinson, and K. Autumn. "Changes in Materials Properties Explain the Effects of Humidity on Gecko Adhesion." J. Exp. Biol. 213(21): 3699-3704, 2010. DOI: 10.1242/jeb.047654.
  18. D.S. Stone, J.E. Jakes, J. Puthoff, and A.A. Elmustafa. "Analysis of indentation creep." J. Mater. Res. 25(4): 611--621, 2010. DOI: 10.1557/JMR.2010.0092.
  19. J.B. Puthoff, J.E. Jakes, H. Cao, and D.S. Stone. "Investigation of thermally activated deformation in amorphous PMMA and Zr-Cu-Al bulk metallic glasses with broadband nanoindentation creep." J. Mater. Res. 24(3): 1279--1289, 2009. DOI: 10.1557/jmr.2009.0145.
  20. J.B. Puthoff. "Plastic Deformation in Bulk Metallic Glasses Characterized by Nanoindentation Creep." Doctoral Dissertation at the University of Wisconsin -- Madison, 2009.
  21. J.B. Puthoff, H.B. Cao, J.E. Jakes, P.M. Voyles, and D.S. Stone. "Shear Transformation Zone Activation during Deformation in Bulk Metallic Glasses Characterized using a New Indentation Creep Technique." In Mater. Res. Soc. Symp. Proc. Vol. 1152E (Materials Research Society, Pittsburgh, PA, USA), 2009.
  22. J.B. Puthoff, D.S. Stone, H. Cao, and P.M. Voyles. "Change in Activation Volume for Plastic Deformation of Zr-based Bulk Metallic Glass following Annealing." In Mater. Res. Soc. Symp. Proc. Vol. 1048E (Materials Research Society, Pittsburgh, PA, USA), 2008. DOI: 10.1557/PROC-1048-Z03-08.
  23. J. Puthoff. "Mesoscale modeling of dislocation bursts during high-temperature plastic deformation." Master's Thesis at the University of Wisconsin -- Madison, 2005.
Other