Skip to content
Pezhman Hassanpour, PhD, PE

Pezhman Hassanpour, PhD, PE

Assistant Professor

Mechanical Engineering, College of Engineering

Email

phassanpour@cpp.edu

Phone number

909.869.3622

Office location

17-2117

Office hours

T TH | REFER TO MY CURRENT SCHEDULE

Publications and Presentations

Journal Publication


  • P. Hassanpour, "Robust resonant beams with a passively-controlled thermally-induced axial force and a designated stationary point," Microsystem Technologies, vol. 29, no. 1, pp. 169-190, 2023.
  • P. Hassanpour and P. M. Nieva and A. Khajepour, "Passive regulation of thermally induced axial force and displacement in microbridge structures," Journal of Applied Mechanics, vol. 84, no. 12, pp. 121003, 2017.
  • P. A. Hassanpour, P. M. Nieva, and A. Khajepour, "Electrostatic fringes effect in systems with three charged parallel micro-beams," Applied Mathematical Modelling, vol. 37, no. 4, pp. 1932-1947, 2013.
  • P. A. Hassanpour, P. M. Nieva, and A. Khajepour, "A passive mechanism for thermal stress regulation in micro-machined beam-type structures: Modeling and experiment," Microsystem Technologies, vol. 18, pp. 543-556, 2012.
  • P. A. Hassanpour, P. M. Nieva, and A. Khajepour, "Thermally-robust asymmetric resonators for energy harvesting applications," Advances in Mathematical and Computational Methods: Addressing Modern Challenges of Science, Technology, and Society, vol. 1368, pp. 61-64, 2011.
  • P. A. Hassanpour, P. M. Nieva, and A. Khajepour, "Stochastic analysis of a novel force sensor based on bifurcation of a micro-structure," Journal of Sound and Vibration, vol. 330, no. 23, pp. 5753-5768, 2011.
  • P. A. Hassanpour, W. L. Cleghorn, E. Esmailzadeh, and J. K. Mills, "Experimental measurement of resonance frequencies of asymmetric micro-bridge resonators," Journal of Intelligent Material Systems and Structures, vol. 22, no. 2, pp. 127-136, 2011.
  • P. A. Hassanpour, E. Esmailzadeh, W. L. Cleghorn, and J. K. Mills, "Nonlinear vibration of micromachined asymmetric resonators," Journal of Sound and Vibration, vol. 329, no. 13, pp. 2547-2564, 2010.
  • P. A. Hassanpour, E. Esmailzadeh, W. L. Cleghorn, and J. K. Mills, "Generalized orthogonality condition for beams with intermediate lumped masses subjected to axial force," Journal of Vibration and Control, vol. 16, no. 5, pp. 665-683, 2010.
  • P. A. Hassanpour, W. L. Cleghorn, J. K. Mills, and E. Esmailzadeh, "Exact solution of the oscillatory behavior under axial force of a beam with a concentrated mass within its interval," Journal of Vibration and Control, vol. 13, no. 12, pp. 1723-1739, 2007.
  • P. A. Hassanpour, W. L. Cleghorn, E. Esmailzadeh, and J. K. Mills, "Vibration analysis of micro-machined beam-type resonators," Journal of Sound and Vibration, vol. 308, no. 1-2, pp. 287-301, 2007.

Conference Publications and Proceedings

  • P. A. Hassanpour, "Model of a Fluid-Level System for the Design and Analysis of Detention Basins Considering Recent Weather Extreme Events and Historic Precipitation Data," in ASME International Mechanical Engineering Congress and Exposition, vol. 87639, pp. V006T07A019, 2023.
  • P. A. Hassanpour, "Application of Second-Order Boundary Conditions in the Vibrations of Beams With Attached Lumped Mass Under Axial Force," in ASME International Mechanical Engineering Congress and Exposition, vol. 86670, pp. V005T07A049, 2022.
  • P. A. Hassanpour, "Natural Frequency and Mode Shape of a Shaft With Elastically Mounted Rotary Inertia From Governing Equations With Dirac Delta Function," in ASME International Mechanical Engineering Congress and Exposition, vol. 86670, pp. V005T07A048, 2022.
  • W. Lee, P. Hassanpour, and S. Tiari, "Effectiveness of a Software-based Service-learning Project in First-year Seminar Course for Engineering Freshmen During the COVID-19 Pandemic," in 2021 ASEE Virtual Annual Conference Content Access, 2021.
  • P. Hassanpour, "Vibration of Beam-Type Resonant Biosensors With Time-Varying Mass Density," in ASME International Mechanical Engineering Congress and Exposition, vol. 59414, pp. V004T05A116, 2019.
  • P. A. Hassanpour, "Approximate Response of Beam-Type Resonant Biosensors," in ASME International Mechanical Engineering Congress and Exposition, vol. 52033, pp. V04AT06A055, 2018.
  • T. Kellar and P. Hassanpour, "Dynamic Characteristics of Resonant Beams With Passive Thermal Stress Regulators," in ASME International Mechanical Engineering Congress and Exposition, vol. 52033, pp. V04AT06A056, 2018.
  • P. A. Hassanpour, K. Alghemlas, and A. Betancourt, "Experimental Modal Analysis of a Fixed-Fixed Beam Under Axial Force," in ASME International Mechanical Engineering Congress and Exposition, vol. 58370, pp. V04AT05A053, 2017.
  • P. A. Hassanpour, "Design, Implementation, and Incorporation of a Control System Platform in an Undergraduate-Level Control Systems Course," in ASME International Mechanical Engineering Congress and Exposition, vol. 58400, pp. V005T06A001, 2017.
  • P. A. Hassanpour, "Analysis of the Quality Factor and Response Time of Resonant Biosensor," in ASME International Mechanical Engineering Congress and Exposition, vol. 50541, pp. V04AT05A031, 2016.
  • R. Byron and P. Hassanpour, "Reducing Stress Concentration in RF MEMS Switch by Optimizing Serpentine Spring Design," in International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, vol. 57113, pp. V004T09A022, 2015.
  • P. Hassanpour, M. Weaser, R. Colquhoun, K. Alghemlas, and A. Alrashdan, "Experimental determination of the mass moment of inertia of a flywheel using dynamics and statistical methods," in ASME International Mechanical Engineering Congress and Exposition, vol. 57397, pp. V04AT04A062, 2015.
  • K. T. Peerless, J. M. Panosian, and P. A. Hassanpour, "Design and implementation of a general control system platform," in ASME International Mechanical Engineering Congress and Exposition, vol. 46507, pp. V005T05A003, 2014.
  • P. A. Hassanpour, "Nonlinear Forced Vibration of a Beam-Type Resonator With Attached Eccentric Mass," in ASME International Mechanical Engineering Congress and Exposition, vol. 46476, pp. V04AT04A047, 2014.
  • P. A. Hassanpour and A. J. Helmns, "Low-Cost Experimental Vibration Analysis of a Cantilever Beam Under Base Excitation," in ASME International Mechanical Engineering Congress and Exposition, vol. 46483, pp. V04BT04A013, 2014.
  • P. A. Hassanpour, "Nonlinear Free Vibration of a Beam With Off-Axis Attached Mass," in ASME International Mechanical Engineering Congress and Exposition, vol. 56253, pp. V04BT04A014, 2013.
  • P. A. Hassanpour and K. Behdinan, "Dynamic Analysis of a Beam-Type Resonator With Off-Axis Attached Mass," in ASME International Mechanical Engineering Congress and Exposition, vol. 45202, pp. 435-441, 2012.
  • P. A. Hassanpour, "Dynamic Analysis of a Beam-Type Resonator With Off-Axis Attached Mass," in ASME International Mechanical Engineering Congress and Exposition, vol. 45202, pp. 435-441, 2012.
  • P. A. Hassanpour, P. M. Nieva, and A. Khajepour, "Dynamic Analysis of Three Parallel Beams With Electrostatic Force Interaction," in ASME International Mechanical Engineering Congress and Exposition, vol. 54938, pp. 635-642, 2011.
  • P. A. Hassanpour, P. M. Nieva, and A. Khajepour, "A novel bi-stable force sensor: theory and modeling," in ASME International Mechanical Engineering Congress and Exposition, vol. 43833, pp. 523-529, 2009.
  • P. A. Hassanpour, C. T. Wong, P. M. Nieva, and A. Khajepour, "Axial force regulation in MEMS resonant sensors," in ASME International Mechanical Engineering Congress and Exposition, vol. 43857, pp. 321-327, 2009.
  • P. A. Hassanpour, P. M. Nieva, and A. Khajepour, "Stochastic analysis of a nonlinear MEMS force sensor," in International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, vol. 44120, pp. 621-629, 2010.
  • P. A. Hassanpour, E. Esmailzadeh, W. L. Cleghorn, and J. K. Mills, "Nonlinear Vibration of Micromachined Resonators With Attached Excitation/Detection Electrostatic Comb-Drives," in ASME International Mechanical Engineering Congress and Exposition, vol. 48722, pp. 921-926, 2008.
  • P. A. Hassanpour, "Experimental Analysis of Vibration of Micromachined Resonators," in ASME International Mechanical Engineering Congress and Exposition, vol. 48746, pp. 351-356, 2008.
  • P. A. Hassanpour, W. L. Cleghorn, E. Esmailzadeh, and J. K. Mills, "Analytical model of a single stage compliant mechanism with flexible lever beam," in Reliability, Packaging, Testing, and Characterization of MEMS/MOEMS VI, vol. 6463, pp. 218-227, 2007.
  • P. A. Hassanpour, W. L. Cleghorn, E. Esmailzadeh, and J. K. Mills, "Vibration analysis of axially loaded Euler-Bernoulli beams with guided mass," in International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, vol. 48027, pp. 2133-2139, 2007.
  • P. A. Hassanpour, W. L. Cleghorn, E. Esmailzadeh, and J. K. Mills, "Modeling and analysis of MEMS-based resonant sensor actuated by bent beam thermal actuator," in Reliability, Packaging, Testing, and Characterization of MEMS/MOEMS V, vol. 6111, pp. 298-309, 2006.
  • P. A. Hassanpour, W. L. Cleghorn, E. Esmailzadeh, and J. K. Mills, "Modeling and analysis of a resonant sensor actuated by a bent beam thermal actuator," in Proceedings of the 17th IASTED International Conference on Modelling and Simulation, pp. 274-279, 2006.
  • P. Hassanpour Asl, E. Esmailzadeh, and H. Mehdigholi, "Application of artificial intelligence in vibration analysis of beams with unconventional boundary conditions," in IEEE International Conference Mechatronics and Automation, vol. 4, pp. 2049-2054, 2005.
  • P. Hassanpour Asl, E. Esmailzadeh, and H. Mehdigholi, "Vibration of Beams With Unconventional Boundary Conditions Using Artificial Neural Network," in International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, vol. 47381, pp. 159-165, 2005.
  • P. Hassanpour Asl, H. Mehdigholi, and E. Esmailzadeh, "Vibration analysis of axially loaded bridges traversed by accelerating vehicles with passenger dynamics," in Engineering Systems Design and Analysis, vol. 4174, pp. 275-280, 2004.

Thesis

  • P. Hassanpour Asl, "Design and analysis of micro-electromechanical resonant structures," Ph.D. dissertation, 2008.

White Papers and Other Non-Peer-Reviewed Articles

  • P. Hassanpour, "The hole expands," Mechanical Engineering Magazine, vol. 133, no. 10, pp. 8-9, 2011.